Using Tasker with Maxymo: Advanced User Guide – Middleton Technologies Support

This guide provides an optional, temporary solution to enable certain Maxymo functions on Uber (e.g., going online and auto-decline). Please note:

This is for advanced users only.
Support article for installing ADB can be found here.
Do not contact Tasker support for help integrating with Maxymo—they will not assist with this setup.
For assistance, consider reaching out to other users in the Maxymo Discord community.

Important Notes

Tasker is required for both Termux and PC/Mac setups, it is also a one time cost paid app and must be purchased separately. This cost is not related to Maxymo.
You will need a computer (PC or Mac) with ADB installed or use the Termux APK.

Tasker Setup Instructions

1. Purchase and Install Tasker

Download Tasker from the Google Play Store:
Tasker on Google Play.

2. Enable External Access in Tasker

Open Tasker.
Go to Preferences > Misc.
Enable Allow External Access.

3. Import the Required Task

Import the tap_location task into Tasker (or manually add):
Import Tap Location Task.
Import the uber_overlay_permission task into Tasker (or manually add):
Overlay Assist Task.
When prompted, select Yes on the Import Data popup.
Task edit for `tap_location` should look like image below

Setup Instructions (PC or Mac)

Enable ADB (Android Debug Bridge) on Your Device

Note: You will need to perform this step every time you restart your Android device.

Connect your Android device to your computer using a USB cable.
Open a terminal or command prompt on your computer and enter:

adb tcpip 5555
Refer to Maxymo Setup Instructions below to test.

Using Termux (If you don't use a PC or Mac)

1. Download, install and setup Termux apk

Note: You should only have to do this step once unless you reset your phone or uninstall termux

Download and install Termux apk
- https://github.com/termux/termux-app/releases/download/v0.118.3/termux-app_v0.118.3+github-debug_universal.apk
To install adb on your device type the following on the command line:

pkg install android-tools

If that fails try:

pkg install adb

Make sure adb is installed (type adb version on the command line)

2. Enable ADB Wifi Access

Note: You will need to perform this step every time you restart your Android device.

Enable wireless debugging on your device (this is under developer options on your device)
Switch to split screen mode with wireless debugging and termux
- On the wireless debugging window tap pair device with pairing code. Make sure to note the ip address and pairing code number (view screenshot) and then tap the termux window to switch screens
- Inside of termux window type adb pair ip address:port number (ip address and port # from previous step)
  - ex: adb pair 10.100.101.152:12345
- Enter the pairing code once termux asked for it
- After it has been connected reference the ip address and port numbers once more from the wireless debugging screen as they may change.
- In the termux window type adb connect ipaddress:port number (it should say connected)
  - ex: adb connect 10.100.101.152: 12345 (check that your port # didn't change after pairing)
- Type adb tcpip 5555 (it should say restarting in TCP mode port: 5555)
- Refer to Maxymo Setup Instructions below to test.

Maxymo Setup Instructions

1. Enable tasker commands in Maxymo

Open Maxymo sidebar menu and tap settings then advanced options
Find "Enable Tasker Commands" and turn it on (you will also need to set touch locations for auto decline)

2. Setup touch locations

Make sure to setup Maxymo touch locations in on the advanced screen for auto-accept & auto-decline to work properly.
Place each # circle in the proper locations (1 is for auto-accept and 2-7 are for auto-decline locations) (it is best to screenshot a few offers to get all the touch locations in the correct spot)
After you setup each of the locations, tap the X to save the locations and close out the instruction menu.

Screenshot 2025-05-24 at 12.27.16 PM.png

7. Test Maxymo Functionality

On the Maxymo main screen attempt to go online (make sure Uber is enabled).
A dialog may appear on your Android device, prompting you to authorize the connection.
- Check Always allow from this computer.
- Tap Allow to confirm.
  For more details, refer to Tasker's ADB Wi-Fi guide.
If Uber successfully goes online, then you have setup tasker with Maxymo correctly.

Need Help?

For community support, join the Maxymo Discord channel and ask other users for assistance. Please respect the terms outlined above and avoid contacting Tasker for Maxymo-specific setup help.

Good luck!